The 7 Inch 1024×600 50PIN RGB 500nit Industrial TFT LCD Module combines a wide-format display area with a high-resolution 1024×600 pixel matrix. Compared with traditional 800×480 7-inch displays, the higher resolution provides additional pixel density for displaying detailed graphics, control menus, icons, charts, status information, and other graphical user interfaces.
The module uses an RGB 50-pin interface, making it suitable for embedded hardware platforms and controller systems designed around parallel RGB display output. This can be particularly useful for engineers who are developing customized industrial equipment and need a display module that can be matched to an existing controller architecture.
The display provides a 500 cd/m² brightness level, which is higher than many standard indoor TFT LCD modules. This makes it suitable for bright indoor environments such as factory floors, equipment rooms, control cabinets, laboratories, and professional embedded equipment. It should not automatically be considered a direct-sunlight-readable display; for strong outdoor sunlight, a higher-brightness configuration and optical enhancement may be more appropriate.
Its 85°/85°/85°/85° viewing angle specification provides broad visibility from different operating positions, helping maintain consistent visual access when the operator is not directly in front of the display.
The 1024×600 resolution provides a clear and detailed user interface within a compact 7-inch display format. It is well suited to applications where 800×480 resolution may not provide sufficient space for graphical controls, monitoring data, or detailed system information.
For industrial HMI applications, the additional resolution can allow designers to display more information without significantly increasing the physical size of the equipment.
The 500 cd/m² brightness configuration improves readability in environments with strong ambient lighting. It is particularly useful for factory equipment, automation panels, instrumentation, control systems, and professional embedded devices.
If the final product will be installed outdoors or exposed to direct sunlight, engineers should evaluate the complete optical system—including cover glass, anti-glare treatment, optical bonding, and backlight performance—instead of judging outdoor readability from brightness alone.
The module uses a 50-pin RGB interface, providing a parallel RGB connection between the LCD module and the host controller. This makes interface compatibility one of the key considerations during system design.
Before ordering samples, engineers should verify RGB signal mapping, timing parameters, power requirements, connector orientation, and PCB layout against the module datasheet.
The specified viewing angle is 85°/85°/85°/85° with CR ≥ 10, supporting visibility from different viewing directions. This is useful for equipment operated by users who may stand or sit at different positions around a machine or control panel.
With a module size of only 164.9 × 100 × 3.5 mm, the display is designed for applications where internal installation space is limited. The compact profile can simplify integration into embedded equipment, industrial control panels, measurement instruments, and other space-constrained products.
The module supports 16.7M colors, allowing it to reproduce detailed graphical interfaces, warning indicators, measurement data, diagrams, icons, and other color-based visual information.
| Parameter | Specification |
|---|---|
| Product Model | DBT070BAN50R050A |
| Display Type | TFT-LCD |
| Display Size | 7.0 inch |
| Resolution | 1024 × 600 pixels |
| Pixel Arrangement | RGB Stripe |
| Interface | RGB |
| Interface Pin Count | 50 PIN |
| Brightness | 500 cd/m² |
| Contrast Ratio | 800:1 |
| Color Depth | 16.7M colors |
| Response Time | 30 ms typical |
| Viewing Angle | 85° / 85° / 85° / 85° |
| Active Area | 154.21 × 85.92 mm |
| Module Dimensions | 164.9 × 100 × 3.5 mm |
| Backlight | 27-LED White LED |
| Supply Voltage | 3.3 V |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
Specifications are based on the product information published by Aptus Display. Please request the latest datasheet and engineering drawing before final product design or mass production.
Choosing a display for an embedded product involves more than comparing screen size and resolution. Engineers need to consider interface compatibility, available installation space, brightness, viewing angle, operating temperature, power supply, mechanical mounting, and long-term supply requirements.
The DBT070BAN50R050A provides a combination of specifications that is particularly suitable for professional embedded equipment.
The 7-inch size offers sufficient visual space for an HMI without making the equipment unnecessarily large. The 1024×600 resolution provides more detailed graphical content, while 500 cd/m² brightness provides enhanced visibility in bright indoor environments.
The 50-pin RGB interface can also be suitable for embedded controller architectures that already provide parallel RGB output. This can help manufacturers avoid redesigning an entire hardware platform around a different display interface.
For projects requiring touch interaction, Aptus Display can also provide touch panel integration and customized display solutions. The company's service capabilities include touch panel customization, brightness adjustment, interface solutions, LCD driver boards, cables, and other accessories.
Industrial Human-Machine Interfaces are one of the most suitable applications for this 7-inch TFT LCD module.
The display can be integrated into machine control panels, automation equipment, PLC-based systems, production equipment, factory monitoring systems, and industrial IoT terminals. The 1024×600 resolution provides enough space for buttons, system status, process diagrams, alarm information, and operating parameters.
Manufacturers of industrial controllers can use this module as the visual interface for equipment configuration and monitoring.
The compact mechanical size makes it suitable for control cabinets and embedded equipment where panel space is limited. The 500 cd/m² brightness can also provide better visibility in brightly illuminated production environments.
Measurement devices often need to present numerical values, graphs, status indicators, and configuration menus simultaneously. The 1024×600 resolution provides useful interface space for these requirements.
Potential applications include testing equipment, laboratory instruments, electrical measurement devices, monitoring terminals, and professional instrumentation.
Automation systems increasingly require integrated graphical interfaces for configuration, diagnostics, and real-time status monitoring.
A 7-inch display can provide a practical operator interface without requiring the large enclosure associated with commercial monitors. It can be integrated into robotic control systems, automation stations, production-line equipment, and machine vision-related control terminals.
The module can also be used in customized embedded control panels where manufacturers require a dedicated LCD rather than a consumer tablet or monitor.
Because Aptus provides display customization and supporting components, customers can evaluate the LCD together with touch panels, driver boards, cables, and other system-level components.
The published product page lists medical devices and monitoring equipment among potential applications.
For medical applications, however, the complete end product must meet the applicable regulatory, electrical safety, EMC, environmental, and other requirements for its intended market. The LCD module itself should not be interpreted as independently certified for a specific medical device application.
When integrating a 50-pin RGB TFT LCD module into a new product, engineers should confirm several technical parameters before committing to production.
First, verify the RGB interface. The host controller must support the required RGB format and timing. Signal assignment, synchronization signals, pixel clock, and connector pin mapping should be checked against the latest technical documentation.
Second, confirm the mechanical dimensions. The active area is 154.21 × 85.92 mm, while the overall module size is 164.9 × 100 × 3.5 mm. Designers should allow appropriate clearance for connectors, cables, mounting structures, and mechanical tolerances.
Third, evaluate brightness according to the actual environment. A 500 cd/m² display is suitable for many bright indoor environments, but applications exposed to direct sunlight may require a higher-brightness display, anti-glare surface treatment, optical bonding, or other optical improvements.
Finally, consider touch integration early. If the equipment requires operator input, integrating a touch panel during the initial mechanical and electrical design stage can reduce redesign work later. Aptus supports touch panel customization and broader LCD integration services.
Not every OEM project can use an off-the-shelf LCD without modification. Mechanical dimensions, brightness, interface configuration, touch requirements, cable routing, and driver-board compatibility may differ from project to project.
Aptus Display provides standard, semi-custom, and customized LCD solutions. Its technical team supports requirements such as touch panel integration, connector and cable solutions, driver boards, brightness customization, and system integration.
For customers developing a new product, the recommended process is to provide the target display size, resolution, interface, brightness, operating environment, expected annual quantity, touch requirements, and mechanical constraints.
Aptus engineers can then evaluate the requirements and recommend a suitable configuration before sample validation and mass production.
Aptus Display, operated by Shenzhen Aptus Technology Co., Ltd., is a professional LCD display manufacturer and customized display solution provider. The company focuses on LCD display R&D, manufacturing, marketing, touch panel solutions, and related display components.
According to Aptus Display's company information, the company has been active in the LCD industry since 2014 and provides customized LCD/LCM development for domestic and international customers. Its experience covers applications including aircraft simulators, automotive systems, agriculture, industrial equipment, and medical machinery.
Aptus also provides LCD driver boards, LCD cables, touch panels, and other accessories, allowing customers to source more elements of their display system from one supplier.
The company's service portfolio includes TFT LCD module customization, LCD monitor customization, driver-board development, accessories, engineering evaluation, prototype development, and production support. Aptus states that its LCD manufacturing workshop has ISO 9001 certification.
This combination of product expertise and engineering support is particularly valuable for OEM customers that need more than a standard LCD panel.
The model number is DBT070BAN50R050A. It is a 7-inch TFT-LCD module with 1024×600 resolution, a 50-pin RGB interface, and 500 cd/m² brightness.
Yes. The module is designed for embedded and industrial-oriented applications and provides a combination of 7-inch size, 1024×600 resolution, 500 cd/m² brightness, wide viewing angles, and RGB interface connectivity. It can be considered for HMI panels, machine control systems, monitoring terminals, and automation equipment.
It depends on the installation environment. 500 cd/m² can provide good visibility in many bright indoor and protected environments, but direct sunlight typically requires a higher-brightness solution and additional optical measures. Aptus can evaluate higher-brightness or customized configurations for outdoor projects.
Yes. Aptus Display supports touch panel customization and integrated LCD solutions. Customers can discuss capacitive or resistive touch requirements, cover glass, bonding, mechanical structure, and controller compatibility with the engineering team.
Customers can contact Aptus Display to request samples, technical documentation, and project consultation. Sample evaluation is recommended to verify electrical compatibility, image quality, mechanical fit, and system integration before mass production.
Yes. Aptus supports standard, semi-custom, and customized LCD solutions. Depending on project requirements, customization can include brightness, touch panel, connectors, cables, driver boards, and other display integration components.
For an OEM or system integrator, selecting an LCD supplier is a long-term engineering and supply-chain decision. Aptus Display combines LCD module manufacturing with technical customization capabilities, allowing customers to address both display performance and integration requirements through one supplier.
Key advantages include:
Professional TFT LCD module development and manufacturing
Standard and customized LCD solutions
7-inch to larger-format TFT LCD product portfolio
RGB, LVDS, MIPI, eDP and other interface solutions across the product range
Touch panel integration
LCD driver board and cable customization
Prototype and sample support
Engineering consultation
Long-term OEM/ODM project cooperation
Global customer support
Aptus's product portfolio includes TFT LCD modules, touch panel LCD modules, wide-temperature displays, bar-type LCD displays, flight simulator displays, gaming LCD modules, LCD accessories, and other specialized display solutions.
If you are looking for a 7-inch 1024×600 RGB TFT LCD module for industrial equipment, HMI, embedded control systems, instrumentation, or automation applications, the DBT070BAN50R050A is a practical display platform to evaluate.
👉 Request a quote or sample
📧 Or email us directly: info@aptusdisplay.com
Click here for the complete product catalog
