Industrial equipment increasingly requires displays that can present detailed operating information clearly while remaining compact enough for embedded installation. The DBT070HAN40L150A addresses these requirements with a 7-inch WSVGA TFT LCD panel and a 1024×600 pixel resolution.
Compared with traditional 800×480 7-inch displays, the 1024×600 format provides a larger horizontal and vertical workspace for modern HMI interfaces. Engineers can use the additional display area for machine parameters, status indicators, graphs, warning messages, control buttons, diagnostic information, and real-time monitoring data.
The most distinctive characteristic of this module is its 1500 cd/m² high-brightness LED backlight. High brightness is important when a display is installed in locations where ambient illumination can reduce perceived contrast. Industrial production floors, semi-outdoor terminals, agricultural equipment, energy infrastructure, and equipment positioned near windows are examples where additional display luminance can be valuable.
The product page identifies the module as an industrial LCD and specifies a 40-pin LVDS interface. Its IPS technology and wide viewing-angle specification further support applications where operators may view the display from different positions.
The DBT070HAN40L150A provides 1500 cd/m² brightness, making it a strong option for high-ambient-light display applications. Compared with standard-brightness industrial LCD modules, the higher luminance provides greater visibility headroom when ambient lighting is strong.
For outdoor equipment, however, brightness should not be evaluated independently. Actual sunlight readability also depends on optical reflection, cover glass, anti-reflective treatment, optical bonding, enclosure design, viewing angle, and the intensity and direction of incident sunlight.
For projects requiring direct-sunlight readability, Aptus Display can evaluate the complete optical configuration rather than relying on brightness alone.
The 1024×600 resolution provides 614,400 pixels in a 7-inch display area.
This resolution is particularly practical for industrial HMI interfaces because it provides enough space for multiple information areas without requiring a larger physical display.
Typical interface layouts can include:
The 16:9-oriented display format also provides flexibility for modern graphical interfaces and embedded operating systems.
The module uses an IPS TFT LCD panel, providing broad viewing performance. The product specification lists a viewing angle of approximately 80°/80°/80°/80° in the technical table.
Wide viewing performance is valuable in industrial equipment because operators do not always stand directly in front of a control panel. A machine operator may need to check the display while standing beside the equipment, while maintenance personnel may view the screen from an angle.
The module uses a 40-pin LVDS interface, providing a mature interface option for compatible industrial controllers, embedded computers, and display control systems.
LVDS is widely used in industrial display systems because it supports differential signaling and is well suited to transferring display data between a controller and LCD module.
Before integrating the module into an existing product, engineers should verify:
The module has an outline dimension of 165 × 104 × 5.05 mm, with an active area of 154.21 × 85.92 mm.
The 5.05 mm profile helps designers integrate the display into compact equipment housings where internal space is limited.
| Parameter | Specification |
|---|---|
| Model | DBT070HAN40L150A |
| Display Size | 7.0 Inch |
| LCD Type | TFT LCD |
| Panel Technology | IPS |
| Resolution | 1024 × 600 pixels |
| Interface | 40-Pin LVDS |
| Brightness | 1500 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 80°/80°/80°/80° |
| Backlight | LED |
| Active Area | 154.21 × 85.92 mm |
| Outline Dimension | 165 × 104 × 5.05 mm |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
These specifications are based on the technical information published on the Aptus Display product page.
Note: The product page's short summary lists the viewing angle as 85°/85°/85°/85°, while its detailed technical specification lists 80°/80°/80°/80°. For production documentation, customers should confirm the latest datasheet with Aptus engineering before finalizing the specification.
Choosing an industrial display requires more than comparing screen sizes. Engineers need to consider the relationship between brightness, resolution, interface, viewing angle, temperature range, mechanical dimensions, power design, and application environment.
The DBT070HAN40L150A combines several important characteristics in one display module.
Its 1500-nit brightness addresses high-ambient-light conditions. The 1024×600 resolution provides a useful interface area without significantly increasing the physical footprint. The IPS panel provides broad viewing performance, while the 40-pin LVDS interface is suitable for compatible embedded display architectures.
The operating temperature range of -20°C to +70°C also makes the module more suitable for industrial equipment than displays intended only for typical indoor consumer environments.
This combination makes the module particularly attractive to OEMs and system integrators developing specialized equipment that requires a 7-inch high-brightness display.
Human-machine interfaces are one of the primary applications for this type of display.
A 7-inch 1024×600 screen provides enough space to display machine status, operating parameters, alarms, control buttons, and diagnostic information.
The high-brightness backlight can help maintain visibility on production floors where industrial lighting may be significantly brighter than a typical office environment.
Typical HMI applications include:
Control panels require displays that can operate reliably for extended periods and remain readable from different operator positions.
The DBT070HAN40L150A can be integrated into machine control panels where the display is used for parameter adjustment, equipment monitoring, maintenance information, and system diagnostics.
The compact mechanical size also allows manufacturers to create relatively compact control interfaces without moving to a larger 10.1-inch display.
Embedded computers frequently require a display module that can be installed directly into a custom enclosure.
The 7-inch form factor offers a useful balance between screen area and physical size. The 40-pin LVDS interface can be integrated into compatible embedded computing architectures.
Applications may include industrial gateways, monitoring terminals, automation controllers, and specialized embedded computers.
The 1500-nit brightness makes this module suitable for evaluating outdoor and semi-outdoor industrial equipment, particularly applications exposed to high ambient illumination.
Potential applications include:
For direct sunlight applications, Aptus recommends evaluating the entire optical stack, including cover glass, optical bonding, surface treatment, and thermal management.
Agricultural equipment can operate in environments with strong sunlight, temperature fluctuations, dust, and vibration.
A high-brightness 7-inch display can provide an effective interface for displaying operating parameters, machine status, navigation information, warnings, and control functions.
The -20°C to +70°C operating temperature specification provides additional flexibility for equipment exposed to changing environmental temperatures.
Power-generation and energy-monitoring equipment may require compact displays for real-time system information.
The 1024×600 resolution can accommodate numerical measurements, graphs, system alerts, and equipment status information on a single interface.
For solar power equipment, energy storage systems, and industrial monitoring terminals, high brightness can be particularly valuable where the equipment is installed in bright environments.
For engineers evaluating this 7-inch LVDS LCD as a replacement or new-design component, several integration factors should be checked before production.
Confirm that the host system supports the required 40-pin LVDS configuration. Pin definitions and timing parameters should be compared with the original display if the module is being used as a replacement.
The module measures 165 × 104 × 5.05 mm, while the active area measures 154.21 × 85.92 mm. Mechanical drawings should be reviewed before enclosure tooling.
A 1500-nit backlight may generate more heat than a conventional low-brightness display. System designers should therefore consider enclosure temperature, continuous operating conditions, heat dissipation, and airflow.
For outdoor applications, simply increasing brightness is not always enough. Reflection from cover glass and the LCD surface can significantly affect perceived readability.
For demanding applications, an integrated solution combining high brightness + optical bonding + suitable cover glass + anti-reflective treatment may provide better real-world performance.
Different industrial products often require different display configurations. Aptus Display provides customization and integration support for industrial LCD projects, including options such as:
These options allow OEMs and system integrators to develop a display solution around their equipment rather than adapting the entire product around a standard LCD.
Aptus's current TFT LCD portfolio includes multiple 7-inch 800×480 and 1024×600 configurations with RGB, LVDS and MIPI interfaces, allowing engineers to compare display size, resolution and interface requirements across different projects.
Aptus Display is operated by Shenzhen Aptus Technology Co., Ltd., a Shenzhen-based display solution provider specializing in TFT LCD modules, industrial displays, customized display solutions, mono LCDs, touch panel LCD modules, and other specialized display technologies.
The company's product portfolio includes TFT LCD modules, industrial LCD modules, wide-temperature LCD displays, touch panel LCD modules, flight simulator displays, bar-type LCD displays, gaming LCD modules, automotive LCD solutions, and LCD accessories.
For industrial customers, Aptus focuses on helping OEMs, distributors, system integrators, and engineering teams identify suitable display components and develop customized display configurations.
Its engineering-oriented services can cover display selection, interface matching, brightness optimization, touch panel integration, cover glass, driver boards, FPC/cable configuration, and project-specific customization.
This approach is particularly useful for customers who are developing specialized equipment and need more than a standard off-the-shelf LCD.
Aptus supports customers with display selection and integration rather than simply supplying individual LCD panels.
Project-specific requirements such as touch panel integration, cover glass, brightness, interface and mechanical configuration can be evaluated according to the application.
The company maintains a broad industrial TFT LCD portfolio covering different sizes, resolutions, interfaces, brightness levels and environmental requirements.
Aptus can work with equipment manufacturers and system integrators during product development, sample evaluation and production stages.
The company serves customers in international markets and provides technical consultation, quotation and project support for industrial display applications.
The DBT070HAN40L150A has a rated brightness of 1500 cd/m² (1500 nits). This high-brightness configuration is designed for applications where stronger display luminance is required.
The module uses a 40-pin LVDS interface. Before integration, engineers should confirm the host controller's LVDS configuration, timing, connector and pin assignment.
It can be considered for outdoor and semi-outdoor industrial applications because of its 1500-nit brightness and industrial temperature specification. However, direct sunlight readability depends on more than brightness. For demanding outdoor projects, optical bonding, anti-reflective treatment, cover glass and thermal management should also be evaluated.
The product specification lists an operating temperature range of -20°C to +70°C and a storage temperature range of -30°C to +80°C.
Yes. Aptus Display states that customization options can include touch panels and GG5 cover glass. Customers can discuss capacitive or resistive touch panel requirements with the engineering team.
Aptus Display provides brightness adjustment and customized display solutions for industrial projects. If a project has specific brightness, optical or environmental requirements, customers can provide the target specification for engineering evaluation.
Typical applications include industrial HMI systems, machine control panels, embedded industrial systems, outdoor industrial equipment, agricultural machinery, energy equipment and industrial monitoring terminals.
It may be suitable for replacement projects when the original display's dimensions, resolution, interface, connector, pin definition, timing, mounting structure and electrical requirements are compatible. Aptus engineering can help compare the existing LCD specification with the DBT070HAN40L150A before replacement.
If you are looking for a 7-inch 1024×600 high-brightness industrial LCD module for an HMI, industrial controller, outdoor terminal, embedded system, agricultural machine, energy device, or other specialized equipment, the DBT070HAN40L150A is worth evaluating.
Aptus Display can provide support for sample evaluation, technical consultation, display customization, touch panel integration, cover glass, optical bonding, interface adaptation and volume production.
👉 Request a quote or sample
📧 Or email us directly: info@aptusdisplay.com
Click here for the complete product catalog
