The DBT070BAN40L035A is a 7-inch 1024×600 LVDS TFT-LCD module designed for industrial equipment, embedded HMI systems, intelligent terminals, instrumentation, transportation equipment, and other professional applications requiring a compact color display with a stable LVDS interface. Featuring a BOE Cell, Normally Black display mode, 350 cd/m² typical brightness, 800:1 contrast ratio, 85° viewing angles, AG anti-glare treatment, and an integrated 27-LED white backlight, this 7-inch LCD module provides a practical combination of image quality, integration flexibility, and reliable operation.
Developed and supplied by APTUS (Shenzhen Aptus Technology Co., Limited), the DBT070BAN40L035A uses a 40-pin LVDS interface and supports 1024(RGB)×600 native resolution with up to 16.7 million colors in 8-bit mode. Its compact 164.9 × 100 × 3.5 mm mechanical profile makes it suitable for embedded products where available installation space is limited.
This product page summarizes the key technical specifications, optical characteristics, electrical requirements, application possibilities, integration considerations, and customization services available from APTUS.
The DBT070BAN40L035A is designed around several features that are important for professional display integration:
7.0-inch color active-matrix TFT-LCD
Native 1024 × 600 resolution
40-pin LVDS interface
Normally Black display mode
RGB-stripe pixel arrangement
350 cd/m² typical luminance
800:1 typical contrast ratio
85° viewing angle in four directions
AG anti-glare surface treatment
16.7M colors with 8-bit input
27-chip white LED backlight
Approximately 1.728 W typical backlight power
3.5 mm module thickness
-10°C to +60°C operating temperature
-20°C to +70°C storage temperature
Flexible scan-direction configuration
6-bit/8-bit mode selection
These characteristics make the module suitable for applications where engineers require a compact LVDS display with dependable optical performance and straightforward embedded integration.
The following table summarizes the primary technical specifications of the DBT070BAN40L035A.
| Parameter | Specification |
|---|---|
| Model | DBT070BAN40L035A |
| Display Type | Color TFT-LCD |
| Display Size | 7.0 inches |
| Resolution | 1024 × 600 pixels |
| Display Mode | Normally Black |
| Pixel Arrangement | RGB Stripe |
| Interface | LVDS |
| Connector | 40 Pin |
| Brightness | 350 cd/m² typical |
| Contrast Ratio | 800:1 typical |
| Viewing Angle | 85° typical, four directions |
| Response Time | 30 ms typical, 40 ms max |
| Color Depth | 16.7M colors |
| NTSC | 50% typical |
| Surface Treatment | AG Anti-Glare |
| Backlight | White LED |
| LED Quantity | 27 LED chips |
| Backlight Power | 1.728 W typical |
| Module Dimensions | 164.9(H) × 100(V) × 3.5(T) mm |
| Active Area | 154.2(H) × 85.9(V) mm |
| Pixel Pitch | 0.0502(H) × RGB × 0.1432(V) mm |
| Digital Supply | 3.3 V typical |
| Analog Supply | 9.8 V typical |
| VGH | 21.4 V typical |
| VGL | -10.4 V typical |
| VCOM | 3.6 V typical |
| LED Forward Voltage | 9.6 V typical |
| LED Current | 180 mA typical |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | -20°C to +70°C |
| Frame Rate | 60 Hz typical |
| Clock Frequency | 51.2 MHz typical |
Technical specifications should be confirmed against the latest APTUS datasheet before mass production. Parameters may be subject to engineering or production revisions.
The DBT070BAN40L035A uses a Normally Black TFT-LCD architecture, which helps provide strong image contrast and clear black-level reproduction. With a typical contrast ratio of 800:1, the module is suitable for graphical user interfaces, industrial dashboards, equipment status screens, measurement interfaces, and other applications requiring clearly distinguishable visual information.
The display provides a typical luminance of 350 cd/m², offering a practical brightness level for indoor industrial environments and many embedded equipment applications.
The module also uses an AG anti-glare surface treatment. Anti-glare treatment can help reduce distracting reflections from surrounding lighting, making information easier to read under factory lighting, office lighting, laboratory illumination, and other environments where reflections may affect display visibility.
The specified viewing angle is approximately 85° in all four directions at CR ≥ 10. This wide viewing-angle characteristic allows operators to view the interface from different positions rather than requiring a perfectly perpendicular viewing direction.
For applications requiring higher brightness, stronger optical performance, optical bonding, or additional surface treatments, APTUS can evaluate alternative display configurations according to project requirements.
The native 1024×600 resolution provides a useful balance between image detail, system processing requirements, and physical display size.
For a 7-inch panel, this resolution provides enough pixel density for graphical HMI interfaces, equipment menus, status indicators, data visualization, charts, icons, and operating controls.
The 16:9-style 1024×600 format is particularly convenient for embedded equipment that uses landscape-oriented interfaces. It can also be incorporated into customized enclosures and control panels where a compact widescreen display is preferred.
Engineers should confirm the output resolution, LVDS configuration, timing parameters, power sequence, and signal mapping of the host controller before finalizing the display design.
The DBT070BAN40L035A uses a 40-pin LVDS interface designed for embedded display integration.
The interface includes LVDS differential signal pairs such as clock and data channels, together with power, control, scan-direction, standby, and backlight connections. The module supports LVDS differential signals including CLK and D0–D3.
Control functions include:
VCOM
DVDD
AVDD
VGH
VGL
Reset
STBYB
U/D scan control
L/R scan control
LVDS clock
LVDS data channels
LED anode
LED cathode
The module supports 6-bit and 8-bit display modes, allowing system designers to select the appropriate color configuration according to their controller architecture.
Because LVDS displays require correct electrical timing and power sequencing, engineers should always refer to the latest product specification when designing the host board. Incorrect power-on or power-off sequences can potentially cause abnormal operation or damage to the display electronics.
The DBT070BAN40L035A integrates a 27-chip white LED backlight.
The typical backlight operating condition is approximately 9.6 V forward voltage at 180 mA, resulting in approximately 1.728 W of typical backlight power.
The LEDA and LEDK connections correspond to the backlight anode and cathode. A suitable constant-current LED driving circuit should be used according to the electrical requirements of the module.
The relatively low typical backlight power makes this module suitable for equipment designed for continuous operation where power consumption is an important system consideration.
When integrating the display into a custom controller board, designers should verify LED current regulation, thermal conditions, brightness control requirements, and electrical protection.
The module measures approximately:
164.9 mm × 100 mm × 3.5 mm
with an active display area of approximately:
154.2 mm × 85.9 mm.
The 3.5 mm thickness provides flexibility for embedded installation, especially when the enclosure has limited internal depth.
Before mechanical production, engineers should verify the complete dimensional drawing, mounting points, FPC or connector position, bezel opening, cable routing, and clearance requirements.
For customers replacing an existing LCD, mechanical compatibility should be confirmed based on the complete outline drawing rather than display size alone.
The DBT070BAN40L035A is specified for an operating temperature range of -10°C to +60°C and a storage temperature range of -20°C to +70°C.
This temperature range allows the display to be considered for a variety of professional equipment operating in controlled industrial, commercial, laboratory, and embedded environments.
The product specification includes reliability evaluations covering areas such as:
High-temperature storage
Low-temperature storage
High-temperature operation
Low-temperature operation
High-temperature and high-humidity operation
Thermal shock
Electrostatic discharge
Image sticking evaluation
The module has also been evaluated for ESD performance, including contact and air discharge conditions specified by the product documentation.
For applications exposed to extreme temperature, condensation, vibration, shock, outdoor sunlight, or other demanding environmental conditions, system-level validation should be performed before mass production.
The 7-inch 1024×600 LVDS display is well suited to industrial human-machine interface applications.
Potential applications include:
PLC operator panels
Industrial control terminals
Machine interfaces
Factory automation equipment
Production monitoring systems
Industrial PCs
Equipment status displays
The 350 cd/m² brightness, AG surface treatment, wide viewing angle, and 1024×600 resolution provide a practical interface for displaying operating parameters and system information.
The compact module can be integrated into professional instrumentation such as analyzers, measurement equipment, test systems, laboratory instruments, and monitoring devices.
The 1024×600 resolution provides sufficient space for graphical data, numerical readings, charts, menus, and system status information.
The module can also be considered for intelligent terminals and embedded control products, including self-service equipment, security terminals, smart control systems, POS-related equipment, and IoT interfaces.
The LVDS interface provides a mature connection option for embedded controller platforms supporting LVDS display output.
The display may be suitable for selected transportation and vehicle-related equipment requiring a compact color LCD.
Potential applications include auxiliary vehicle information displays, transportation control equipment, monitoring terminals, and professional onboard systems.
For automotive applications with specific temperature, vibration, EMC, qualification, or regulatory requirements, the complete system should be validated against the relevant vehicle standards.
The DBT070BAN40L035A can also be used in robotics, educational equipment, control terminals, security products, communication equipment, and other professional devices requiring a compact 7-inch LCD.
Standard LCD specifications may not always match the mechanical, optical, or electrical requirements of an OEM product. APTUS therefore supports customized display solutions for qualified projects.
Customization and engineering services may include:
Custom brightness
Capacitive touch panel integration
Resistive touch panel integration
Cover glass
Optical bonding
Anti-glare treatment
Custom cables
Connector modifications
LCD driver boards
Interface conversion solutions
Backlight optimization
Mechanical customization
Customized temperature requirements
Customers should provide the target application, required display size, resolution, interface, mechanical constraints, brightness requirements, touch requirements, operating environment, and expected annual quantity when requesting a customized solution.
Shenzhen Aptus Technology Co., Limited (APTUS) is a professional display technology company specializing in TFT-LCD modules, touch panel solutions, display accessories, driver boards, and customized display solutions.
APTUS works with engineers, OEM manufacturers, system integrators, procurement teams, distributors, and project developers to provide display products for professional applications.
The company's capabilities cover the complete display development process, from product selection and technical evaluation to customization, sample verification, and production support.
APTUS focuses on practical engineering requirements such as interface compatibility, optical performance, mechanical integration, touch functionality, backlight design, and long-term product supply.
By offering standard display modules together with customized engineering services, APTUS helps customers reduce display integration complexity and shorten the development cycle.
For projects requiring a specific LCD configuration, touch panel, brightness level, interface solution, driver board, or mechanical structure, the APTUS technical team can evaluate the application requirements and recommend an appropriate solution.
Before integrating the DBT070BAN40L035A into a production system, engineers should verify:
Electrical compatibility: Confirm VDD, AVDD, VGH, VGL, VCOM, LED forward voltage, LED current, and all relevant power requirements.
LVDS compatibility: Confirm LVDS signal mapping, clock frequency, timing parameters, color depth, and host controller compatibility.
Power sequence: Follow the specified power-on and power-off sequence to reduce the risk of latch-up or abnormal display operation.
Mechanical fit: Verify the module outline, active area, mounting structure, connector location, cable routing, and enclosure clearance.
Thermal environment: Confirm that the expected operating temperature remains within the specified -10°C to +60°C range.
Backlight driving: Use appropriate constant-current LED driving and ensure that the backlight circuit is correctly designed.
System validation: Test the display under the actual operating conditions of the final product before beginning mass production.
The native resolution is 1024 × 600 pixels. The module supports 8-bit input for up to 16.7 million colors and can also be configured for 6-bit operation.
The DBT070BAN40L035A uses a 40-pin LVDS interface with differential clock and data channels. Engineers should use the latest APTUS datasheet to verify exact pin assignments and timing requirements.
The typical luminance is 350 cd/m². If a project requires higher brightness, APTUS can recommend alternative modules or evaluate a customized display solution.
The specified operating temperature is -10°C to +60°C, while the storage temperature range is -20°C to +70°C.
Yes. The DBT070BAN40L035A uses an AG anti-glare surface treatment, which can help reduce reflections caused by ambient lighting.
The module uses 27 white LED chips. The typical backlight condition is approximately 180 mA at 9.6 V, corresponding to approximately 1.728 W of typical backlight power.
Yes. APTUS can evaluate capacitive or resistive touch panel integration for suitable projects. Custom cover glass, optical bonding, cables, and related components may also be available depending on project requirements.
Yes. APTUS can provide display-related driver board and interface solutions depending on the host system and project requirements. Customers should provide information about the processor, output interface, resolution, and target application for compatibility evaluation.
Yes. Its 7-inch form factor, 1024×600 resolution, LVDS interface, AG treatment, 350 cd/m² brightness, wide viewing angle, and -10°C to +60°C operating temperature make it suitable for many industrial and embedded applications. Final suitability should always be verified against the environmental and electrical requirements of the complete system.
Contact APTUS with the model number DBT070BAN40L035A, required quantity, application, host interface, and project requirements. The sales and engineering teams can assist with sample availability, technical documentation, and quotation.
If you are sourcing a 7-inch 1024×600 LVDS LCD module for an industrial, embedded, instrumentation, intelligent terminal, or professional equipment project, the DBT070BAN40L035A can be evaluated as a compact standard display solution.
👉 Request a quote or sample
📧 Or email us directly: info@aptusdisplay.com
Click here for the complete product catalog
