The DBT101BEN40L150A is a 10.1-inch high-brightness TFT LCD display featuring 1280×800 WXGA resolution, a 40-pin LVDS interface, and 1500 nits typical brightness. Designed for industrial HMI systems, outdoor-facing equipment, control panels, and specialized embedded devices, this display combines high daylight visibility with a normally black panel design, a 1000:1 typical contrast ratio, and an operating temperature range of -20°C to +70°C. Its LVDS interface and compact active area make it a practical option for equipment manufacturers seeking a high-brightness LCD module for professional applications.
Developed for integration into customer-designed systems, the DBT101BEN40L150A supports 16.7 million colors through 6-bit color depth with Hi-FRC, a typical response time of 35 ms, and wide viewing angles. APTUS can also discuss display integration requirements, including driver board matching, protective cover glass, and optical bonding, depending on the project's mechanical and optical specifications.
The DBT101BEN40L150A is an industrial-oriented 10.1-inch TFT LCD module intended for applications where standard-brightness displays may not provide sufficient visibility. Its 1500-nit typical brightness helps improve readability in high ambient light, while its 1280×800 resolution provides additional vertical and horizontal workspace for operating interfaces, equipment status information, measurement data, and graphical controls.
The 40-pin LVDS interface provides a defined electrical connection for compatible display control systems. Before integration, engineers should verify the complete pin assignment, LVDS signal configuration, timing requirements, supply voltage, and backlight drive specifications against the product datasheet and the selected controller board.
With a normally black display mode, a typical contrast ratio of 1000:1, and a specified operating temperature range of -20°C to +70°C, this module is suitable for evaluation in industrial control equipment and other professional display systems. Actual performance depends on the complete system design, including enclosure construction, thermal management, ambient lighting, and any additional optical components.
10.1-inch TFT LCD display: A practical size for industrial control interfaces and embedded equipment.
1280×800 WXGA resolution: Provides space for detailed graphical interfaces, equipment status screens, and multi-section control layouts.
1500 nits typical brightness: Improves visibility in bright indoor environments and many high-ambient-light applications.
40-pin LVDS interface: Supports integration with compatible display controllers and embedded computing systems.
1000:1 typical contrast ratio: Helps distinguish interface elements, text, and graphical information.
Wide viewing angles: Typical viewing angles of 80° in all four directions at CR ≥ 10.
16.7 million display colors: Uses 6-bit color depth with Hi-FRC to support a broader range of displayed colors.
Industrial temperature capability: Specified operating temperatures from -20°C to +70°C.
LED backlight: Dedicated backlight anode and cathode connections are provided through the display connector.
These features make the module worth evaluating for applications that require a balance of display area, resolution, brightness, and integration flexibility.
The following table summarizes the key specifications of the DBT101BEN40L150A. Please consult the full datasheet for detailed electrical timing, connector pin assignments, mechanical dimensions, and operating conditions.
| Parameter | Specification |
|---|---|
| Model Number | DBT101BEN40L150A |
| Display Type | a-Si TFT-LCD |
| Display Mode | Normally Black |
| Screen Size | 10.1 inches |
| Resolution | 1280 × 800 pixels |
| Resolution Class | WXGA |
| Active Area | 216.96 (H) × 135.6 (V) mm |
| Pixel Pitch | 0.0565 (H) × 0.1695 (V) mm |
| Pixel Arrangement | RGB Vertical Stripe |
| Display Colors | 16.7 million |
| Color Depth | 6-bit + Hi-FRC |
| Brightness | 1500 nits typical |
| Contrast Ratio | 1000:1 typical |
| Viewing Angle | 80° / 80° / 80° / 80° typical |
| Response Time | 35 ms typical, 40 ms maximum |
| Color Gamut | 50% NTSC typical |
| Interface | LVDS |
| Connector | 40-pin |
| Panel Supply Voltage | 3.0–3.6 V, 3.3 V typical |
| Panel Power Consumption | 0.6 W typical, 0.8 W maximum |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
| Operating Humidity | 10–90% RH, non-condensing |
| Typical Display Clock | Approximately 72.4 MHz at 60 Hz operation |
Note: Values identified as typical or maximum follow the supplied product information. Confirm the applicable measurement conditions, complete module power requirements, backlight electrical specifications, and mechanical drawings in the latest official datasheet before finalizing a design.
Brightness is a key consideration when selecting a display for equipment installed near windows, under strong industrial lighting, or in outdoor-facing locations. With 1500 nits typical brightness, the DBT101BEN40L150A provides a higher light output than conventional low-brightness display modules, helping interface information remain more visible when ambient illumination increases.
However, brightness alone does not determine sunlight readability. Reflections from the cover surface, internal optical interfaces, viewing angle, display contrast, and enclosure design can all influence the final image. For installations exposed to direct sunlight, engineers should evaluate the module under representative lighting conditions rather than relying exclusively on its nominal brightness specification.
Depending on the application, anti-glare or anti-reflective surface treatments, optical bonding, and protective cover glass may help improve the overall viewing experience. These components must be selected according to the required optical performance, mechanical structure, and environmental conditions.
The module's typical 1000:1 contrast ratio and wide viewing angles support the presentation of text, diagrams, status indicators, and graphical controls. Its 1280×800 resolution is also useful when an interface requires more vertical space than a conventional 1024×600 layout can provide.
The DBT101BEN40L150A uses a 40-pin LVDS interface. LVDS is commonly used in embedded display systems where differential signaling provides a practical connection between a compatible display controller and an LCD module.
A successful integration requires more than matching the connector's pin count. Engineers should confirm the LVDS channel configuration, signal mapping, clock polarity, display timing, logic voltage, connector orientation, and backlight requirements. The host controller must support the panel's 1280×800 resolution and the timing specified in the official documentation.
The panel supply voltage is specified as 3.0–3.6 V, with 3.3 V typical. This value refers to the panel supply and should not be interpreted as the complete power requirement of the display assembly. The LED backlight has separate electrical requirements that must be checked before selecting a driver circuit.
For a new design, a recommended evaluation process is to:
Confirm the panel's mechanical dimensions and mounting arrangement.
Check the host controller's LVDS output compatibility and timing support.
Verify the panel power supply and LED backlight driver requirements.
Evaluate brightness, viewing angles, and thermal behavior in the intended enclosure.
Test the complete system across the expected operating temperature range.
Following these checks can reduce integration risks and help identify additional requirements before prototype tooling or volume production begins.
The DBT101BEN40L150A can be evaluated in professional applications that require a compact, high-resolution, high-brightness color display.
Industrial human-machine interfaces often present operating parameters, process status, alarms, and control functions on a single display. The 10.1-inch active area and 1280×800 resolution provide room for organized interface layouts, while 1500 nits typical brightness helps maintain visibility in brightly illuminated production areas.
Information terminals, access-control equipment, and outdoor-facing control systems may experience high ambient light. The module's elevated brightness makes it a candidate for these applications, subject to testing of the complete enclosure and optical stack. For direct-sunlight installations, additional reflection control and thermal management may be necessary.
Professional instruments may need to display measurements, graphs, operating modes, and system warnings simultaneously. The WXGA resolution supports detailed information layouts, while the LVDS connection can simplify integration when the host electronics provide a compatible output.
Building management interfaces and equipment control panels can benefit from a display that presents multiple system parameters in a clear visual hierarchy. The 10.1-inch format offers a useful balance between viewing area and installation space for custom control equipment.
Custom machinery and professional equipment may require a display module that fits a defined enclosure while meeting specific brightness, resolution, and temperature requirements. The DBT101BEN40L150A can be assessed for such designs after mechanical, electrical, and environmental compatibility has been established.
For applications involving severe vibration, condensation, extreme sunlight exposure, or temperatures outside the specified operating range, additional qualification is required. The panel's specifications should be evaluated as part of the complete device rather than treated as a guarantee of finished-system performance.
Choosing an LCD module involves more than selecting a screen size. The display must work with the host controller, power architecture, mechanical enclosure, backlight driver, and intended user environment.
APTUS supports industrial display projects by helping customers evaluate display specifications and related integration requirements. Depending on project feasibility and order requirements, support may include compatible driver-board evaluation, protective cover glass, optical bonding, touch-panel integration, cable configuration, and mechanical customization.
For the DBT101BEN40L150A, customers should provide the intended application, controller or board information, installation environment, target brightness, and mechanical requirements when requesting technical support. This information helps establish whether the module is suitable for the project and whether additional components or modifications should be considered.
Any customization should be confirmed with the APTUS team before design approval. Availability, technical feasibility, lead time, and minimum order requirements may vary according to the requested configuration.
The DBT101BEN40L150A has a native resolution of 1280 × 800 pixels, also known as WXGA. This resolution is suitable for displaying detailed operating interfaces, system status information, diagrams, and measurement data on a 10.1-inch display.
The module has a typical brightness of 1500 nits. This high brightness can improve visibility in bright indoor environments and many outdoor-facing applications. Final sunlight readability depends on reflections, cover glass, optical bonding, viewing angle, and thermal conditions.
Yes. The module uses a 40-pin LVDS connector. Before connecting it to a host board, confirm the pin assignment, signal configuration, timing parameters, and electrical requirements in the official datasheet.
The specified operating temperature range is -20°C to +70°C, and the storage temperature range is -30°C to +80°C. The finished device must also meet the thermal requirements of its enclosure and installation environment.
It can be evaluated for outdoor-facing equipment because of its 1500-nit typical brightness and specified operating temperature range. Direct-sunlight applications require additional assessment of reflections, enclosure temperature, moisture protection, and the overall optical design. The module alone does not establish an IP protection rating for the finished product.
The supplied specifications identify the DBT101BEN40L150A as a TFT-LCD module and do not establish that a touch panel is integrated. If touch operation is required, contact APTUS to discuss a compatible touch panel, cover glass, controller, and mechanical configuration.
APTUS can discuss optical bonding, protective cover glass, and related integration options for qualifying projects. Feasibility depends on the required dimensions, optical performance, mechanical design, and project quantity. Confirm the proposed configuration with the engineering team before ordering.
Provide the model number DBT101BEN40L150A, estimated quantity, intended application, project schedule, and any special optical or mechanical requirements. If available, include the host controller model, required cable arrangement, operating environment, and touch-panel requirements. These details help the team evaluate compatibility and prepare a relevant quotation.
APTUS specializes in TFT-LCD modules and customized display solutions for industrial and professional equipment manufacturers. The company has been involved in the LCD industry since 2014, with capabilities spanning display product development, manufacturing coordination, and customer support.
Its product and solution portfolio includes TFT-LCD modules, touch panels, LCD control boards, driver boards, cables, backlight-related components, and integrated display assemblies. Depending on project requirements, customers can discuss options involving resolution, brightness, interface, touch functionality, cable configuration, cover glass, and mechanical structure.
APTUS supports customers from initial product evaluation through integration planning and production requirements. Technical documentation, sample evaluation, and engineering discussions can help equipment manufacturers assess display compatibility before committing to a final design.
For professional projects, customers should verify the latest product specifications, sample availability, customization feasibility, and long-term supply arrangements directly with APTUS.
Looking for a 10.1-inch 1280×800 1500-nit LVDS TFT LCD display for an industrial control panel, high-brightness terminal, or custom embedded system? Contact APTUS to request the latest datasheet, mechanical drawings, sample availability, and project-specific pricing.
When submitting an inquiry, include your target application, required quantity, controller-board details, installation environment, and any touch-panel or optical-bonding requirements. Our team can help review the key specifications and discuss suitable integration options for your project.
👉 Request a quote or sample
📧 Or email us directly: info@aptusdisplay.com
Click here for the complete product catalog
