15.6" Android TFT LCD Display KITS

During assembly and use, please pay attention to the following (but not limited to) problems.

1. Relative humidity ≤ 85%
2. Storage temperature: - 30 ℃ to+70 ℃
3. Operating temperature: - 20 ℃ to+60 ℃
4. During the assembly of the whole machine, please do not operate the wiring with power to avoid shortcircuit between bare board and peripheral equipment.
5. Pay attention to the anti-static treatment during the assembly and transportation of the whole machine, and it is necessary to wear electrostatic protection tools such as electrostatic bracelet (sleeve).
6. When assembling the whole machine, it can be installed at the bottom or side, but do not deform or twistthe board, and do not bear heavy pressure.
7. Proper distance shall be reserved at the wiring position of each terminal to avoid squeezing the terminalduring installation.
8. The connecting line between this board and the supporting module board should not be too long, otherwise it may affect the image quality.
9. The internal wiring of the whole machine shall be reasonable, and the connecting wires shall not passthrough the PCB board directly as far as possible.
10. In order to achieve better EMC effect for the whole machine, it is recommended that the screen wirebetween the main board and the screen should be shielded wire.
11. The specifications of the peripherals connected to the installation shall be confirmed with our company, including but not limited to: voltage limit, current limit, timing, power domain, etc